Bolt hole circle Ø (mm)

Num. of holes

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

For oe no.

grdgdrgdr

Fitting position

When purchasing car parts, understanding the importance of the fitting position is crucial for ensuring the correct functionality and safety of your vehicle. Here's why:

1. • Compatibility: Different parts of a vehicle have specific designs and functions tailored to their fitting positions. Installing a part in the wrong position can lead to compatibility issues, causing malfunctions or even damage to other components.
2. • Performance: Each part is engineered to operate optimally within its designated fitting position. Placing a part in the wrong position may compromise its performance, leading to inefficient operation, reduced lifespan, or even failure.
3. • Safety: Certain car parts play critical roles in ensuring the safety of the vehicle and its occupants. Installing safety-related components in the wrong position can significantly compromise vehicle safety, increasing the risk of accidents or injury.
4. • Warranty and Liability: Installing parts in incorrect positions can void warranties and hold the installer liable for any resulting damages or accidents. Manufacturers typically specify fitting positions to ensure proper functionality and to protect against liabilities.
5. • Regulatory Compliance: In some regions, vehicle modifications or improper installations may violate regulations or emissions standards. Ensuring parts are installed in their correct positions helps maintain compliance with regulatory requirements.

In summary, paying attention to the fitting position when purchasing car parts is essential for ensuring compatibility, performance, safety, warranty compliance, and regulatory adherence. Always refer to manufacturer specifications and seek professional assistance if unsure about proper installation procedures.

Machining

Tightening torque (Nm)

Centering diameter (mm)

Surface

Min. thickness (mm)

Supplementary article/supplementary info 2

Num. of holes

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

Height (mm)

Wheel bolt bore Ø (mm)

Centering diameter (mm)

Min. thickness (mm)

Bolt hole circle Ø (mm)

Quantity required

Num. of holes

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

Height (mm)

Fitting position

When purchasing car parts, understanding the importance of the fitting position is crucial for ensuring the correct functionality and safety of your vehicle. Here's why:

1. • Compatibility: Different parts of a vehicle have specific designs and functions tailored to their fitting positions. Installing a part in the wrong position can lead to compatibility issues, causing malfunctions or even damage to other components.
2. • Performance: Each part is engineered to operate optimally within its designated fitting position. Placing a part in the wrong position may compromise its performance, leading to inefficient operation, reduced lifespan, or even failure.
3. • Safety: Certain car parts play critical roles in ensuring the safety of the vehicle and its occupants. Installing safety-related components in the wrong position can significantly compromise vehicle safety, increasing the risk of accidents or injury.
4. • Warranty and Liability: Installing parts in incorrect positions can void warranties and hold the installer liable for any resulting damages or accidents. Manufacturers typically specify fitting positions to ensure proper functionality and to protect against liabilities.
5. • Regulatory Compliance: In some regions, vehicle modifications or improper installations may violate regulations or emissions standards. Ensuring parts are installed in their correct positions helps maintain compliance with regulatory requirements.

In summary, paying attention to the fitting position when purchasing car parts is essential for ensuring compatibility, performance, safety, warranty compliance, and regulatory adherence. Always refer to manufacturer specifications and seek professional assistance if unsure about proper installation procedures.

Packaging height (cm)

Packaging width (cm)

Packaging length (cm)

Wheel bolt bore Ø (mm)

Hole pitch/number

Centering diameter (mm)

Weight (kg)

Surface

Min. thickness (mm)

Bolt hole circle Ø (mm)

Supplementary article/supplementary info 2

Brake disc thickness (mm)

Brake disc type

Inner diameter (mm)

Outer diameter (mm)

Height (mm)

Weight

Hole pitch/number

Centering diameter (mm)

Appr. stamp

Weight (kg)

Rim (-Hole)

Surface

Min. thickness (mm)

Bolt hole circle Ø (mm)

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

Height (mm)

Centering diameter (mm)

Min. thickness (mm)

Bolt hole circle Ø (mm)

Supplementary article/supplementary info 2

Num. of holes

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

Height (mm)

Fitting position

When purchasing car parts, understanding the importance of the fitting position is crucial for ensuring the correct functionality and safety of your vehicle. Here's why:

1. • Compatibility: Different parts of a vehicle have specific designs and functions tailored to their fitting positions. Installing a part in the wrong position can lead to compatibility issues, causing malfunctions or even damage to other components.
2. • Performance: Each part is engineered to operate optimally within its designated fitting position. Placing a part in the wrong position may compromise its performance, leading to inefficient operation, reduced lifespan, or even failure.
3. • Safety: Certain car parts play critical roles in ensuring the safety of the vehicle and its occupants. Installing safety-related components in the wrong position can significantly compromise vehicle safety, increasing the risk of accidents or injury.
4. • Warranty and Liability: Installing parts in incorrect positions can void warranties and hold the installer liable for any resulting damages or accidents. Manufacturers typically specify fitting positions to ensure proper functionality and to protect against liabilities.
5. • Regulatory Compliance: In some regions, vehicle modifications or improper installations may violate regulations or emissions standards. Ensuring parts are installed in their correct positions helps maintain compliance with regulatory requirements.

In summary, paying attention to the fitting position when purchasing car parts is essential for ensuring compatibility, performance, safety, warranty compliance, and regulatory adherence. Always refer to manufacturer specifications and seek professional assistance if unsure about proper installation procedures.

Svhc

Centering diameter (mm)

Appr. stamp

Surface

Min. thickness (mm)

Drum Ø (mm)

Bolt hole circle Ø (mm)

Colour

Num. of holes

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

Height (mm)

Thread size

Wheel bolt bore Ø (mm)

Centering diameter (mm)

Quality

Surface

Min. thickness (mm)

Bolt hole circle Ø (mm)

Quantity required

Supplementary article/supplementary info 2

Num. of holes

Brake disc thickness (mm)

Brake disc type

Outer diameter (mm)

Height (mm)

Fitting position

When purchasing car parts, understanding the importance of the fitting position is crucial for ensuring the correct functionality and safety of your vehicle. Here's why:

1. • Compatibility: Different parts of a vehicle have specific designs and functions tailored to their fitting positions. Installing a part in the wrong position can lead to compatibility issues, causing malfunctions or even damage to other components.
2. • Performance: Each part is engineered to operate optimally within its designated fitting position. Placing a part in the wrong position may compromise its performance, leading to inefficient operation, reduced lifespan, or even failure.
3. • Safety: Certain car parts play critical roles in ensuring the safety of the vehicle and its occupants. Installing safety-related components in the wrong position can significantly compromise vehicle safety, increasing the risk of accidents or injury.
4. • Warranty and Liability: Installing parts in incorrect positions can void warranties and hold the installer liable for any resulting damages or accidents. Manufacturers typically specify fitting positions to ensure proper functionality and to protect against liabilities.
5. • Regulatory Compliance: In some regions, vehicle modifications or improper installations may violate regulations or emissions standards. Ensuring parts are installed in their correct positions helps maintain compliance with regulatory requirements.

In summary, paying attention to the fitting position when purchasing car parts is essential for ensuring compatibility, performance, safety, warranty compliance, and regulatory adherence. Always refer to manufacturer specifications and seek professional assistance if unsure about proper installation procedures.

Centering diameter (mm)

Appr. stamp

Surface

Min. thickness (mm)

Bolt hole circle Ø (mm)

Supplementary article/supplementary info 2

Bore Ø (mm)

Num. of holes

Brake disc thickness (mm)

Brake disc type

Inner diameter (mm)

Outer diameter (mm)

Height (mm)